New IEC International Electrotechnical Commission Articles
ISO 80601-2-69:2014-Medical electrical equipment Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment, IEC 80601-2-60:2019-Medical electrical equipment-Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment, IEC 61169-1-2:2019-Radio-frequency connectors-Part 1-2: Electrical test methods-Insertion loss, IEC 60601-2-29:2008-Medical electrical equipment-Part 2-29: Particular requirements for the basic safety and essential performance of radiotherapy simulators, IEC 60601-2-75:2017-Medical electrical equipment-Part 2-75: Particular requirements for the basic safety and essential performance of photodynamic therapy and photodynamic diagnosis equipment, IEC 60364-7-740:2000-Electrical installations of buildings-Part 7-740: Requirements for special installations or locations-Temporary electrical installations for structures, IEC TS 62371:2008-Characteristics of hollow pressurised and unpressurised ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V, IEC 60512-9-2:2011-Connectors for electronic equipment-Tests and measurements-Part 9-2: Endurance tests-Test 9b: Electrical load and temperature, IEC 80601-2-58:2014-Medical electrical equipment-Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery, IEC TS 62610-3:2009-Mechanical structures for electronic equipment-Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series-Part 3: Design guide: Evaluation method for thermoelectrical cooling systems (Peltier effect). Have a look at this IEC 60335-2-48:2002/AMD1:2008-Amendment 1-Household and similar electrical appliances-Safety-Part 2-48: Particular requirements for commercial electric grillers and toasters for more tips.
IEC 61189-5-601:2021-Test methods for electrical materials, IEC 61326-2-1:2012-Electrical equipment for measurement, IEC 60027-7:2010-Letter symbols to be used in electrical technology-Part 7: Power generation, IEC 60335-2-16:2002-Household and similar electrical appliances-Safety-Part 2-16: Particular requirements for food waste disposers, IEC 60464-3-2:2001-Varnishes used for electrical insulation-Part 3: Specifications for individual materials-Sheet 2: Hot curing impregnating varnishes, IEC 60455-3-1:2003-Resin based reactive compounds used for electrical insulation-Part 3: Specifications for individual materials-Sheet 1: Unfilled epoxy resinous compounds, IEC 60670-22:2003-Boxes and enclosures for electrical accessories for household and similar fixed electrical installations-Part 22: Particular requirements for connecting boxes and enclosures, IEC 61508-6:2010-Functional safety of electrical/electronic/programmable electronic safety-related systems-Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508), IEC 60893-3-2:2003-Insulating materials-Industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3-2: Specifications for individual materials-Requirements for rigid laminated sheets based on epoxy resins, ISO 80079-37:2016-Explosive atmospheres-Part 37: Non-electrical equipment for explosive atmospheres-Non electrical type of protection constructional safety "c". Have a look at this IEC 62610-2:2018-Mechanical structures for electrical and electronic equipment-Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series-Part 2: Method for the determination of forced air cooling for the best PDFs.
IEC 60335-2-47:2002/AMD1:2008-Amendment 1-Household and similar electrical appliances-Safety-Part 2-47: Particular requirements for commercial electric boiling pans, IEC 60704-2-1:2014-Household and similar electrical appliances-Test code for the determination of airborne acoustical noise-Part 2-1: Particular requirements for vacuum cleaners, IEC 60034-14:2018-Rotating electrical machines-Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher-Measurement, IEC 61196-1-107:2005-Coaxial communication cables-Part 1-107: Electrical test methods-Test for cable microphony charge level (mechanically induced noise), IEC 60704-2-14:2013/AMD1:2019-Amendment 1-Household and similar electrical appliances-Test code for the determination of airborne acoustical noise-Part 2-14: Particular requirements for refrigerators, IEC 60422:2013-Mineral insulating oils in electrical equipment-Supervision and maintenance guidance, IEC 61466-2:1998/AMD1:2002-Amendment 1-Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V-Part 2: Dimensional and electrical characteristics, IEC 62966-1:2019-Mechanical structures for electrical and electronic equipment-Aisle containment for IT cabinets-Part 1: Dimensions and mechanical requirements, ISO 80601-2-67:2020-Medical electrical equipment-Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment, IEC 60958-4-4:2016-Digital audio interface-Part 4-4: Professional applications-Physical and electrical parameters. Have a look at this IEC 60669-2-5:2013-Switches for household and similar fixed electrical installations-Part 2-5: Particular requirements-Switches and related accessories for use in home and building electronic systems (HBES) for the best info.
IEC 62742 Ed. 1.0-Electrical and electronic installations in ships-Electromagnetic compatibility (EMC)-Ships with a non-metallic hull, IEC 60335-2-31:2012-Household and similar electrical appliances-Safety-Part 2-31: Particular requirements for range hoods and other cooking fume extractors, IEC 60599:2015-Mineral oil-filled electrical equipment in service-Guidance on the interpretation of dissolved and free gases analysis, IEC 60216-4-1:2006-Electrical insulating materials-Thermal endurance properties-Part 4-1: Ageing ovens-Single-chamber ovens, IEC 60364-7-701:2019-Low-voltage electrical installations-Part 7-701: Requirements for special installations or locations-Locations containing a bath or shower, IEC 60601-2-45:2011-Medical electrical equipment-Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices, IEC 60670-22:2003/AMD1:2015-Amendment 1-Boxes and enclosures for electrical accessories for household and similar fixed electrical installations-Part 22: Particular requirements for connecting boxes and enclosures, IEC 62933-1:2018-Electrical energy storage (EES) systems-Part 1: Vocabulary, IEC 60601-1-11:2015-Medical electrical equipment-Part 1-11: General requirements for basic safety and essential performance-Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment, IEC 60601-2-41:2009-Medical electrical equipment-Part 2-41: Particular requirements for the basic safety and essential performance of surgical luminaires and luminaires for diagnosis.